Chippers & Brush Cutters

Source: www.TurfMagazine.com

These days, diversity is everything, and contractors caring for their clients’ properties don’t just maintain their turf and flowers, they look out for the entire property. Sometimes that includes cleaning up limbs or branches from a tree or shrub, or more. Therefore, it’s a good idea to invest in a chipper or shredder, and we just so happen to have some of the latest models right here.

And, don’t forget, you can also find additional information about the companies highlighted in red by visiting their advertisements in this issue.

Chippers

CEAttachments

The EDGE wood chipper attachment has a 20-by20-inch self-feeding hopper, 25-inch rotor with hardened steel reversible blades and 65-inch discharge chute with 360-degree rotation.

http://www.ceattachments.com


Loftness

The VMLogix Carbide Cutter G3 by Loftness is available with 51-, 61- and 71-inch cutting widths. It features a two-stage cutting chamber with staggered counter teeth and a shear bar.

http://www.vm-logix.com


Salsco

The 810M features a 10-inch-high-by-18-inch-wide infeed opening and is designed to chip large amounts of brush and branches. Options include Speed Sensing and gas or diesel engine.

http://www.salsco.com


Vandermolen

The WOOD-PRO Model 20D16E powered by 16 hp Vanguard electric-start engine processes branches and brush up to 4 inches. The small chips are ideal for use as mulch.

http://www.vandermolencorp.com


Brush Cutters

Bobcat Company

The Brushcat rotary cutter attachment operates in both forward and reverse modes and mulches small branches and saplings up to 3 inches in diameter. Front rollers allow it to traverse uneven terrain.

http://www.bobcat.com


CEAttachments

The EDGE Hi-Reach Tree Clipper features a 6-foot reach and 100-degree cutting head. Makes a smooth cut on hardwoods up to 9 inches in diameter, even at ground level.

http://www.ceattachments.com


Little Wonder

The BRC-26 hydro brush cutter features a 28-inch cutter deck that houses a reversible 26-inch cutter blade with height adjustments from 3.25 to 4.75 inches. Can cut sapling growth up to 2 inches thick.

http://www.littlewonder.com


Peco

The Brush Blazer walk-behind brush cutter cuts woody material up to 4-inch-diameter trees. It applies only 3 PSI ground pressure and can be used on hillsides up to 30 degrees.

http://www.brushblazer.com


Turf Teq

Turf Teq’s Model 1305BC features a 13 hp Honda engine and is self-propelled with a fully hydrostatic forward/reverse transmission. Variable angle cutting head allows cutting under fences, trees and more.

http://www.turfteq.com


Ventrac

Ventrac Tough Cut Mowers feature a 68-inch-wide cutting width and optional dual wheels for slopes up to 30 degrees. Optional swivel wheel kit controls adjustment of cutting height.

http://www.ventrac.com


Accesssories

W.E. Chapps

Brush Chapps provide protection to the front and sides of the lower body, with an open back. Features custom foam pads, a tough Cordura nylon exterior shell and inside pad pockets.

http://www.wechapps.com


Check out the December issue for Product Focuses to Landscape Design Software and GIE Mower/New Product Wrap-up!