Source: www.TurfMagazine.com
In order to keep your clients’ properties in pristine condition, you need to make sure you take care of every last detail. That’s where trimmers and edgers come in.
The manufacturers included in this month’s product focus know you need versatile tools for a job well done. We’ve even added accessories specific to these types of equipment.
And, don’t forget, you can find additional information about the companies highlighted in red by visiting their advertisements in this issue.
Trimmers
|
Core Outdoor Power
Core Elite
- Engine: Battery-powered
- Cutting diameter: 16 inches
- Feature: Torque is equivalent to a 45cc gas engine
http://www.coreoutdoorpower.com |
|
|
Echo
SRM-266T
- Engine: Engine: 25.4cc
- Cutting diameter: 17 inches
- Feature: 59-inch, four-layer flexcable helps with tough applications
http://www.echo-usa.com |
|
|
ECHO Bear Cat
WT190
- Engine: 190cc Briggs & Stratton
- Cutting diameter: 24 inches
- Feature: A variety of accessoriesavailable to customize machine
http://www.bearcatproducts.com |
|
|
GreenWorks Tools
21362 DigiPro
- Engine: 40-volt Li-Ion Battery
- Cutting diameter: 14 inches
- Feature: Attachment capable andcompatible with gas attachments
http://www.greenworkstools.com |
|
|
Honda
HHT35SLTA
- Engine: GX35
- Cutting diameter: 17 inches
- Feature: Strong low-end torquecharacteristics allow for partialthrottle, increasing fuel efficiency
http://powerequipment.honda.com |
|
|
Hover Trimmer/Seago Int’l
HT-300
- Engine: 30cc or higher; variable
- Cutting diameter: 15 inches
- Feature: Shaped blade pushes airinto hood to provide lift, reducescalping
http://www.seagousa.com |
|
|
Husqvarna
326LS
- Engine: 24.5cc Husqvarna E-Tech 11
- Cutting diameter: 19 inches
- Feature: Magnesium crankcase andsteel shaft protect machine
http://www.husqvarna.com |
|
|
Oregon
ST275
- Engine: Battery powered
- Cutting diameter: 13 inches
- Feature: Dual-line cutting head withflip-down edge guide makes it atrue 2-in-1 tool
http://www.oregoncordless.com |
|
|
Peco (New Peco, Inc.)
Z-Trimmer
- Engine: Electric
- Cutting diameter: 17-inchmaximum
- Feature: Mounts to mowerdeck, allowing user to trimwhile mowing
http://www.lawnvac.com |
|
|
Shindaiwa
T235
- Engine: 21.2cc
- Cutting diameter: 20 inches
- Feature: High-capacity Speed-Feed400 cutting head
http://www.shindaiwa-usa.com |
|
|
STIHL, Inc.
FS 94 R
- Engine: 24.1cc
- Cutting diameter: 16.5 inches
- Feature: The ECOSPEED throttleadjustment wheel sets effectivespeed for particular applications.
http://www.stihlusa.com |
|
|
TMC Power Equipment
KPW2750V
- Engine: 26.3cc/1 hp Kawasaki
- Cutting diameter: 17 inches
- Feature: Two-cycle engine, metaldebris shield, cast aluminum clutchhousing.
http://www.tmcpower.com |
|
|
Vandermolen Corporation
WINDMILL L4320K
- Engine: 43.2cc Kawasaki
- Cutting diameter: 22 inches
- Feature: Loop handle withsafety bar.
http://www.vandermolencorp.com |
|
Edgers
|
Atom Edgers/Seago Int’l
ATCPE4
- Engine: 35cc Honda GX-35
- Cutting depth: 3.75 inches
- Feature: Shaft-drivenwheelbarrow-style; optional wirebrush wheel blade for asphalt
http://www.seagousa.com |
|
|
Echo
PE-280
- Engine: 28.1cc
- Cutting depth: 8 inches
- Feature: Ergonomicallycomfortablerubber left andright handle grips
http://www.echo-usa.com |
|
|
Havener
E-40
- Engine: 4 hp/158cc B&SProfessional Series 550
- Cutting depth:
- Feature: Eight position depth of cutadjustment
http://www.havenerent.com |
|
|
Little Wonder
BedShaper
- Engine: 13 hp Honda GXV390
- Cutting depth: .5 to 4.5 inches
- Feature: Cuts crisp clean edges,even “S” curves, up to 100 feet perminute
http://www.littlewonder.com |
|
|
Quail Mfg.
Manual Sod Edger
- Engine: N/A
- Cutting depth: 5 inches
- Feature: Requires no gas or oil; littleor no maintenance
http://www.quailsodcutter.com |
|
|
Shindaiwa
LE242
- Engine: 23.9cc
- Cutting depth: 2.75 inches
- Feature: Ergonomically designedleft handle reduces operator fatigue
http://www.shindaiwa-usa.com |
|
|
The Grasshopper Co.
Edge-EZE
- Engine: N/A: Attachment
- Cutting depth: 2.5 inches
- Feature: 12-inch vertical adjustment,attaches to either side ofmower deck
http://www.grasshoppermower.com/edge-eze |
|
|
Turf Teq
1305 Power Edger
- Engine: 13 hp Honda
- Cutting depth: 5 inches
- Feature: Three functions:bed opening, bed groomingand trenching
http://www.turfteq.com |
|
Accessories
|
Edgit
The Edgit is an edging guide designed for trimmers. The rolling guide indicates where the string cuts and vertically edges as fast as the operator can walk.
http://www.edgit.com |
|
|
W.E. Chapps
The Deluxe Strap Chapps add aprotective and comfort feature toStrap Chapps. A pair of 14-inchlongfoam pads slide into pocketson the inside of the chap. Can bepulled up as knee pads.
http://www.wechapps.com |
|