Husqvarna 335LS • Engine: 34.6cc X-Torq • Cutting diameter: N/A • Feature: Low fuel consumption and reduced exhaust emissions
www.husqvarna.com
RedMax BCZ2460TS • Engine: 24cc Strato-Charged • Cutting diameter: 19 inches • Feature: MaxTorque gear case and MaxFlex throttle lever
www.redmax.com
Seago International Trim-A-Lawn Wheel Trimmer • Engine: 50cc Tecumseh • Cutting diameter: 14 inches • Feature: Open sides allow for trimming and mowing at the same time
www.seagousa.com
Shindaiwa T254 • Engine: 24.5cc Hybrid 4 • Cutting diameter: 20 inches • Feature: Speed-Feed head and full anti-vibration system
www.shindaiwa.com
Echo SRM-280T • Engine: 28.1cc Power Boost Vortex • Cutting diameter: 17 inches • Feature: 16.9-fluid-ounce fuel tank, debris shield with built-in knife
www.echo-usa.com
Efco DS 2800 • Engine: 1.3 hp, 27cc Emak • Cutting diameter: 16 inches • Feature: Burn Right engine reduces fuel consumption and emissions
www.efcopower.com
Gravely Pro-Trim • Engine: 6.25 hp, 190cc B&S • Cutting diameter: 22 inches • Feature: Reinforced steel pivot head, 14-gauge stamped steel deck
www.gravely.com
Honda HHT35SLTA • Engine: 35.8cc Honda GX35 • Cutting diameter: 17 inches • Feature: Durable flex shaft and ergonomically positioned controls
www.hondapowerequipment.com
Jonsered GC 2128 • Engine: 1.1 hp, 28cc • Cutting diameter: N/A • Feature: Chrome cylinder and three-piece crankshaft
www.usa.jonsered.com
Kawasaki KGT27C • Engine: 26.3cc Kawasaki TJ27E • Cutting diameter: N/A • Feature: Hollow steel driveshaft, easy-start recoil, heavy-duty air filter
www.kawpower.com
Makita USA EM2650LH • Engine: 25.4cc • Cutting diameter: N/A • Feature: Steel driveshaft and easily adjustable handle
www.makitatools.com
Stihl FS 90 R • Engine: 28.4cc • Cutting diameter: 16.5 inches • Feature: Solid driveshaft and TapAction AUTOCUT 25-2 head
www.stihlusa.com
Tanaka TCS31EBSLP • Engine: 1.4 hp, 30.8cc • Cutting diameter: 17 inches • Feature: Solid steel driveshaft, includes blade and trimmer head
www.tanakapowerequipment.com
Vandermolen Windmill L4320K • Engine: 43.2cc Kawasaki • Cutting diameter: 22 inches • Feature: Loop handle with safety bar
www.vandermolencorp.com
Featured Edgers E-Z Trench Mfg. Bedscaper BE400 • Engine: Honda GX200 • Cutting depth: 2, 3 or 4 inches • Feature: Caster steering for shaping flowerbeds and tree rings
www.eztrench.com
Grasshopper Edge-EZE • Engine: Mower attachment • Cutting depth: 2.5 inches • Feature: Electric actuator with vertical adjustment up to 12 inches
www.grasshoppermower.com
GreenWorks GreenWorks 12A Electric Edger • Engine: 12-amp electric • Cutting depth: Variable • Feature: 7.5-inch double-edged blade, spring-assist front wheel
www.greenworkstools.com
Husqvarna 327ES • Engine: 1.2 hp, 24.5cc E-Tech II • Cutting depth: 2.68 inches • Feature: Wear plate under engine and reinforced spark plug guard
www.husqvarna.com
RedMax HEZ3001S • Engine: 1.4 hp, 29.5cc Strato-Charged • Cutting depth: 2.75 inches • Feature: MaxTorque, die-cast aluminum guard, vibration dampening
www.redmax.com
Seago International Atom Professional Edger • Engine: 34cc Redmax, 35cc Honda • Cutting depth: 4 inches • Feature: Fully enclosed blade guard and safety trigger interlock
www.seagousa.com
Shindaiwa LE254 • Engine: 24.5cc Hybrid 4 • Cutting depth: 2.75 inches • Feature: Purge-pump carburetor and electronic ignition system
www.shindaiwa.com
Turf Teq 1305 Power Edger • Engine: 13 hp Honda • Cutting depth: 5 inches • Feature: Standard opening blade, variety of optional trenching blades
www.turfteq.com
Edgers Echo PE-265S • Engine: 25.4cc Power Boost Vortex • Cutting depth: 2.5 inches • Feature: Pro-Torque gear case, i-30 starter, replaceable steel wear plate
www.echo-usa.com
Little Wonder Little Wonder Pro • Engine: 3.5 hp B&S, 4 hp Honda • Cutting depth: Up to 4 inches • Feature: Fingertip controls and 10-inch, reversible blades
www.littlewonder.com
Sweeperman Edge-N-Blow • Engine: Tractor-mounted • Cutting depth: 15 or 18-inch edger • Feature: PTO-driven blower component mounts to three-point hitch
www.sweeperman.net
Featured Accessories Edgit The Edgit is an edging guide designed for trimmers. The rolling guide indicates where the string cuts and vertically edges as fast as the operator can walk.
www.edgit.com
W.E. Chapps The W.E. Trimmer Cover protects engines and fuel tanks. The outer material is water-repellent and resists mildew, abrasions and tears. Three liners available.
www.wechapps.com
Accessories Power Chute Design The one-piece, ROPS-mounted trimmer rack holds trimmers and edgers. It can be transferred between mowers, with no holes to drill or permanent mounting needed.
www.powerchutedesign.com