1. Aqua-Bella Designs

The Triple Basalt fountain kit is a set of three solid columns with varying heights made of volcanic rock. Sizes are 18, 24 and 30 inches. The rocks have an 8- to 10-inch diameter. Basalt is a dense crystalline material, about 10 percent heavier than granite.

2. Anchor Wall

ChiselEdge Edgers are a landscaping component to the ChiselWall system. Three unique face patterns give the edgers a distinctive look similar to hand-chiseled stone. Entrances and tree rings are some possible project applications, according to the company.

3. Belgard

The Tandem Column Kit from Belgard’s natural collection can be installed by setting the grid on the U-Start base or a solid base, attach veneers to the column with connectors and cap the column. It can be used for new columns or around existing deck posts and installation for patios, outdoor kitchens, pillars and outdoor living rooms. The column grid height is 42 inches and comes in two colors: Avondale and River Street.

4. Cambridge Pavers

The Cambridge Ledgestone Wall has a natural-looking rock face with bold ridges and deep clefts. The wallstones are 4 x 8 x 12 inches, and can be used in many single-sided applications from a freestanding and retaining wall to steps and edging. A Ledgestone Wall Corner for left and right corners is also available.

5. Fireboulder

The Large-Linear fireboulders are hand carved and designed to accommodate a 36-inch linear burner. Dimensions and weights of these boulders vary, but typically weigh between 900 and 2,000 pounds. The dimensions are roughly 71 x 28 x 15 inches.

6. Keystone Retaining Wall Systems

The Keystone Country Manor Wall has stones with three finished sides and an interlocking pin system. The stones come in 2-, 3- or 5-piece systems to reach a 3-foot height, or higher with proper engineering. The stones have an Old World charm and look hand-laid, according to the company.

7. Pavestone

The Bishop’s Hat pavers from Pavestone consist of two geometric concrete pavers with many design options. The two shapes modulate together to form patterns with different color choices. Each stone weighs 10.05 pounds. These pavers are suggested for courtyards, driveways, parks, patios, pool decks and more.

8. Pine Hall Brick

Rumbled StormPave Permeable Pavers are full-range, 4-x-8-inch clay pavers with beveled edges. The large spacer bars provide spacing for washed aggregate filled joints that allow water to drain freely between the paving units. The pavers initial rate of infiltration is more than 500 inches per hour. The dimensions are 4 x 8 x 2.25 (or 2.75) inches. The pavers are available in 10 color options.

9. Porous Pave

Porous Pave is a pour-in-place permeable paving material that is porous and flexible. The highly porous material allows for large amounts of water to drain through it, draining up to 5,800 gallons per hour per square foot. The product’s flexibility allows the material to withstand freeze-thaw cycles without cracking or heaving. It is made in the U.S. from kiln-dried aggregate and recycled tires. The high rubber content ensures good traction even when wet.

Porous Pave

Photo: Porous Pave

10. Techo-Bloc

From the Techo-Bloc Stonedge Collection, the new Travertina Raw slabs have the texture of natural travertine in a concrete material. This product line has been improved to make it more durable than the natural alternative, especially for winter climates. The collection has been expanded with a double-sided, structural retaining wall system, two wall caps and pool coping with three color tones.

11. Unilock

The Eco-Optiloc permeable pavers form Unilock are environmentally friendly and can solve drainage issues, according to the company. They have a patented L-shaped design for a lock-up that can withstand heavy loads residentially and commercially. The design creates small voids between the pavers providing drainage into the sub-base. Surface textures can be customized for commercial projects.

12. Rosetta Hardscapes

The round fire pit kit from Rosetta has six different sized stone pieces as part of the layout pattern, plus the stone caps. From the base to the cap level, the fire pit height measures 14.5 inches. Gas conversion kits are available, as well as different color choices based on location.

Have a new product? Submit entries using our Product Form for Turf, Turf Design Build and PLOW, a supplement to Turf.