Zero-Turn Mowers and Accessories

Source: www.TurfMagazine.com

Considered one of the most important pieces of equipment in the industry, these mowers are a part of just about every company’s equipment arsenal. Check out the latest models here, along with attachments that can turn your zero-turn mower into a total lawn care system.

BigDog Mowers

X Diablo

  • Engine: Kawasaki FX850 or FX1000
  • Trans.: Pumps and wheel motors
  • Cut Width: 60 or 72 inches
  • Feature: 10.4-gallon fuel capacity, 14 mph

www.bigdogmowers.com


BOB-CAT

ProCat SE

  • Engine: 674 or 725cc Kohler Command Pro
  • Trans.: 12cc Hydro-Gear pumps
  • Cut Width: 52 or 61 inches
  • Feature: Cutting range from 1 to 5.5 inches

www.bobcatturf.com


Bush Hog

ES, EC and PZ Series

  • Engine: 20 to 30 hp Kohler and Kawasaki
  • Trans.: Hydro-Gear
  • Cut Width: 44, 52, 55, 61 or 73 inches
  • Feature: Fusion blades for a clean cut

www.bushhog.com


Country Clipper

Zero-turn mowers

  • Engine: 18 to 37 hp Kohler and Kawasaki
  • Trans.: Hydrostatic
  • Cut Width: Up to 72 inches
  • Feature: One-handed Point-N-Go joystick

www.countryclipper.com


Cub Cadet

RZT S

  • Engine: 25 hp Kohler Courage
  • Trans.: Dual Hydro-Gear EZT
  • Cut Width: 42, 46 or 50 inches
  • Feature: SmartJet deck wash, cruise control

www.cubcadet.com


Dixie Chopper

Magnum 2750

  • Engine: 27 hp B&S
  • Trans.: Hydro-Gear ZT-3400
  • Cut Width: 50 inches
  • Feature: 3,000-hour drivetrain warranty

www.dixiechopper.com


Dixon

DX200

  • Engine: 31 hp Kawasaki
  • Trans.: Hydrostatic
  • Cut Width: 60 inches
  • Feature: Computer-aided cutting deck

www.dixon-ztr.com


Ferris

IS 1500Z

  • Engine: 18.5 to 28 hp B&S and Kawasaki
  • Trans.: Pumps and wheel motors
  • Cut Width: 44 to 61 inches
  • Feature: 10 mph ground speed

www.ferrisindustries.com


Grasshopper

True ZeroTurn MaxTorque Diesel

  • Engine: Kubota MaxTorque
  • Trans.: T6 hydrostatic
  • Cut Width: 52, 61 or 72 inches
  • Feature: Tier 4i-compliant and B5-ready

www.grasshoppermower.com


Gravely

Pro-Turn 400 XDZ

  • Engine: 24.5 to 31 hp Kawasaki, Kubota, Kohler
  • Trans.: Hydro-Gear ZT-5400
  • Cut Width: 52, 60, 66 or 72 inches
  • Feature: Dial system to adjust cut height

www.gravely.com


Husqvarna

PZ6029FX

  • Engine: 25.5 hp Kawasaki
  • Trans.: Pump and wheel motor
  • Cut Width: 60 inches
  • Feature: High-productivity cutting deck designs

www.husqvarna.com/us


Hustler Turf Equipment

Super Z

  • Engine: Kawasaki FX850 or FX1000
  • Trans.: Dual hydrostatic
  • Cut Width: 60, 66 or 72 inches
  • Feature: VX4 deck technology for a clean cut

www.hustlerturf.com


John Deere

ZTrak PRO Z925 EFI

  • Engine: 27 hp
  • Trans.: Tuff Torq
  • Cut Width: 54 or 60 inches
  • Feature: Brake & Go starting system

www.deere.com


Kubota

ZP330

  • Engine: 31 hp LPG
  • Trans.: HST
  • Cut Width: 60 or 72 inches
  • Feature: Hands-free hydraulic deck lift

www.kubota.com


Land Pride

Commercial Series

  • Engine: 27 hp Kawasaki
  • Trans.: Dual hydrostatic
  • Cut Width: 60 or 72 inches
  • Feature: Standard remote air filter

www.landpride.com


Lastec

4520 Articulator

  • Engine: 45 hp Kubota
  • Trans.: N/A
  • Cut Width: 120 inches
  • Feature: Five fully articulating rotary decks

www.lastec.com


Mean Green Products

CXR-62

  • Engine: 36-volt battery
  • Trans.: N/A
  • Cut Width: 62 inches
  • Feature: Cut 4 to 5 acres per charge

www.meangreenproducts.com


Snapper Pro

S200xt

  • Engine: 25.5 to 36 hp B&S or Kawasaki
  • Trans.: Hydro-Gear Commercial ZT-5400
  • Cut Width: 61 or 72 inches
  • Feature: Mows up to 6 acres per hour

www.snapperpro.com


Tilton Equipment

Yard Shark

  • Engine: 25 hp
  • Trans.: Dual-path hydrostatic
  • Cut Width: 60 inches
  • Feature: Exceptionally low center of gravity

www.yardsharkmowers.com


Toro

Z Master Commercial 3000 Series

  • Engine: 20.5 to 23.5 hp Kawasaki
  • Trans.: Hydrostatic
  • Cut Width: 48, 52 or 60 inches
  • Feature: 7-gauge welded steel deck

www.toro.com


Walker Mfg.

Super B Diesel

  • Engine: Yanmar Minimax
  • Trans.: Hydro-Gear transaxle
  • Cut Width: 52, 60 or 74 inches
  • Feature: Rubber isolation engine mounts

www.walkermowers.com


Worldlawn Power Equipment

Cobra Series

  • Engine: 24 or 27 hp Kawasaki
  • Trans.: Hydro-Gear pump and motor
  • Cut Width: 48, 52 or 60 inches
  • Feature: 13 cutting heights from 1.5 to 4.5 inches

www.worldlawnpowerequipment.com


Wright Mfg.

ZTO

  • Engine: 22 to 30 hp Kawasaki and B&S
  • Trans.: Hydro-Gear ZT-3400
  • Cut Width: 48, 52 and 61 inches
  • Feature: Zero Technology Optimized

www.wrightmfg.com


Accessories

 

Accelerator Industries

Grass catchers feature ultra-light, all-welded construction; rust-free, high-durability aluminum alloy; double T handles; and a removable back door for easy dumping. www.acceleratorindustries.com


JRCO

The Tine Rake Dethatcher removes embedded thatch and leaves while mowing. It has flexible tines for turning while dethatching and comes in 36, 46 and 60-inch widths. www.jrcoinc.com


ProLawn

The sprayer/spreader has specially designed aerodynamic shields that help control drift by keeping chemicals within the spray chamber. Spray up to 5.5 acres per tank. www.prolawnsprayshields.com


ProMow

The Gold 5 Series offers an 8-foot-1-inch cut, low horsepower requirements, adjustable cutting heights, easy sharpening and zero-turn full reverse capability. www.promow.com


TurfEx

The Thatch, Groom ‘N’ Sweep package is an attachment system that can be converted from a sweeper to a dethatcher without the need for additional equipment. www.turfexproducts.com


UTECO

The ZRATOR is a steerable, front-mount core plug aerator that allows users to go left, right, forward and in reverse without raising the tines out of the ground. www.zrator.com


W.E. Chapps

The Deluxe Rider/Z Cover secures around the mower with strong elastic. The waterproof, tear-resistant outer cover comes with no liner, cotton liner or heat liner. www.wechapps.com