Featured Trimmers

Husqvarna

335LS
•    Engine: 34.6cc X-Torq
•    Cutting diameter: N/A
•    Feature: Low fuel consumption and reduced exhaust emissions

www.husqvarna.com


RedMax

BCZ2460TS
•    Engine: 24cc Strato-Charged
•    Cutting diameter: 19 inches
•    Feature: MaxTorque gear case and MaxFlex throttle lever

www.redmax.com


Seago International

Trim-A-Lawn Wheel Trimmer
•    Engine: 50cc Tecumseh
•    Cutting diameter: 14 inches
•    Feature: Open sides allow for trimming and mowing at the same time

www.seagousa.com


Shindaiwa

T254
•    Engine: 24.5cc Hybrid 4
•    Cutting diameter: 20 inches
•    Feature: Speed-Feed head and full anti-vibration system

www.shindaiwa.com


Echo

SRM-280T
•    Engine: 28.1cc Power Boost Vortex
•    Cutting diameter: 17 inches
•    Feature: 16.9-fluid-ounce fuel tank, debris shield with built-in knife

www.echo-usa.com


Efco

DS 2800
•    Engine: 1.3 hp, 27cc Emak
•    Cutting diameter: 16 inches
•    Feature: Burn Right engine reduces fuel consumption and emissions

www.efcopower.com


Gravely

Pro-Trim
•    Engine: 6.25 hp, 190cc B&S
•    Cutting diameter: 22 inches
•    Feature: Reinforced steel pivot head, 14-gauge stamped steel deck

www.gravely.com


Honda

HHT35SLTA
•    Engine: 35.8cc Honda GX35
•    Cutting diameter: 17 inches
•    Feature: Durable flex shaft and ergonomically positioned controls

www.hondapowerequipment.com


Jonsered

GC 2128
•    Engine: 1.1 hp, 28cc
•    Cutting diameter: N/A
•    Feature: Chrome cylinder and three-piece crankshaft

www.usa.jonsered.com


Kawasaki

KGT27C
•    Engine: 26.3cc Kawasaki TJ27E
•    Cutting diameter: N/A
•    Feature: Hollow steel driveshaft, easy-start recoil, heavy-duty air filter

www.kawpower.com


Makita USA

EM2650LH
•    Engine: 25.4cc
•    Cutting diameter: N/A
•    Feature: Steel driveshaft and easily adjustable handle

www.makitatools.com


Stihl

FS 90 R
•    Engine: 28.4cc
•    Cutting diameter: 16.5 inches
•    Feature: Solid driveshaft and TapAction AUTOCUT 25-2 head

www.stihlusa.com


Tanaka

TCS31EBSLP
•    Engine: 1.4 hp, 30.8cc
•    Cutting diameter: 17 inches
•    Feature: Solid steel driveshaft, includes blade and trimmer head

www.tanakapowerequipment.com


Vandermolen

Windmill L4320K
•    Engine: 43.2cc Kawasaki
•    Cutting diameter: 22 inches
•    Feature: Loop handle with safety bar

www.vandermolencorp.com


Featured Edgers

E-Z Trench Mfg.

Bedscaper BE400
•    Engine: Honda GX200
•    Cutting depth: 2, 3 or 4 inches
•    Feature: Caster steering for shaping flowerbeds and tree rings

www.eztrench.com


Grasshopper

Edge-EZE
•    Engine: Mower attachment
•    Cutting depth: 2.5 inches
•    Feature: Electric actuator with vertical adjustment up to 12 inches

www.grasshoppermower.com


GreenWorks

GreenWorks 12A Electric Edger
•    Engine: 12-amp electric
•    Cutting depth: Variable
•    Feature: 7.5-inch double-edged blade, spring-assist front wheel

www.greenworkstools.com


Husqvarna

327ES
•    Engine: 1.2 hp, 24.5cc E-Tech II
•    Cutting depth: 2.68 inches
•    Feature: Wear plate under engine and reinforced spark plug guard

www.husqvarna.com


RedMax

HEZ3001S
•    Engine: 1.4 hp, 29.5cc Strato-Charged
•    Cutting depth: 2.75 inches
•    Feature: MaxTorque, die-cast aluminum guard, vibration dampening

www.redmax.com


Seago International

Atom Professional Edger
•    Engine: 34cc Redmax, 35cc Honda
•    Cutting depth: 4 inches
•    Feature: Fully enclosed blade guard and safety trigger interlock

www.seagousa.com


Shindaiwa

LE254
•    Engine: 24.5cc Hybrid 4
•    Cutting depth: 2.75 inches
•    Feature: Purge-pump carburetor and electronic ignition system

www.shindaiwa.com


Turf Teq

1305 Power Edger
•    Engine: 13 hp Honda
•    Cutting depth: 5 inches
•    Feature: Standard opening blade, variety of optional trenching blades

www.turfteq.com


Edgers

Echo

PE-265S
•    Engine: 25.4cc Power Boost Vortex
•    Cutting depth: 2.5 inches
•    Feature: Pro-Torque gear case, i-30 starter, replaceable steel wear plate

www.echo-usa.com


Little Wonder

Little Wonder Pro
•    Engine: 3.5 hp B&S, 4 hp Honda
•    Cutting depth: Up to 4 inches
•    Feature: Fingertip controls and 10-inch, reversible blades

www.littlewonder.com


Sweeperman

Edge-N-Blow
•    Engine: Tractor-mounted
•    Cutting depth: 15 or 18-inch edger
•    Feature: PTO-driven blower component mounts to three-point hitch

www.sweeperman.net


Featured Accessories

Edgit

The Edgit is an edging guide designed for trimmers. The rolling guide indicates where the string cuts and vertically edges as fast as the operator can walk.

www.edgit.com


W.E. Chapps

The W.E. Trimmer Cover protects engines and fuel tanks. The outer material is water-repellent and resists mildew, abrasions and tears. Three liners available.

www.wechapps.com


Accessories

Power Chute Design

The one-piece, ROPS-mounted trimmer rack holds trimmers and edgers. It can be transferred between mowers, with no holes to drill or permanent mounting needed.

www.powerchutedesign.com